Noritsu QSS Green III

Model for success 4.0

The universal duplex printing device for specialist photographic retailers and photographers is suitable for processing smaller and larger photo quantities as well as for the production of individual value-added photo products. For duplex printing of paper rolls, its output range is from 9 x 9 cm up to the panorama format of 30 x 140 cm. Every hour, up to 1,180 photos can be output "from the roll" in the 9 x 13 cm format, up to 950 photos in the 10 x 15 cm format, 274 photos in the 20 x 30 cm format and 127 photos in the 30 x 45 cm format (rated output of 720 dpi). As standard, the QSS Green III is supplied with two paper magazines for 100 m paper rolls, one each for single-lane and dual-lane paper feed.

Paper rolls are available in common photo paper widths of 102 to 305 mm. Paper feed depends on the width of the paper and can be freely selected from 89 to 1,400 mm in millimetre steps. Printing is possible with a print resolution of either 720 or 1,440 dpi as desired.

For the production of value-added photo products printed on both sides, paper sheets up to 30 cm wide are inserted into the single-sheet feeder. The paper step length for single paper sheets ranges from 178 to 635 mm. The device is thus able to produce duplex-printed greeting cards and photo book and calendar pages, for example, in the 20 x 20 cm, 20 x 25 cm and A4 to 30 x 30 cm formats. Tried-and-tested piezo-inkjet technology with DSM (dot size manipulation) is used as the printing system. It can vary each printing dot in five different sizes and can also include paper white as a "sixth option."

The ink cartridges can even be swapped during printing. The device is supplied with a sorter with 12 trays, each for 50 photos up to 152 mm in width, which also features the useful display of job interruption. Data can be transferred from current storage media by the operator at the EZ Controller, by the customer using system-compatible SPC terminals in the shop or online thanks to SPC software.